Glazing the door


Ok, we have established a nice grain pattern throughout the door that has some nice oak grain features. Its not to much and consistent with the other areas of actual oak around it. At this point we really have full control of where the door is going. We can apply one or two glaze coats to dial in the final color. We can then apply some aging effects if that is what is called for ( more on that in other posts). I should also mention that after each stage of the door I used a coat of blonde shellac to seal the previous layer. I then lightly buff it with at 400 grit sanding sponge. Shellac is an outstanding product and works well for barrier coats.

A view of the final door GO HERE

No comments:

Post a Comment